slider-item
slider-thumbnail
09A6A4D8-B163-4E92-A166-5E60BBD227F0
CoreMax Rapid Charge and Evacuation System

CoreMax Valve Core Removal Tool

Product Number: CM-CRTOOL

Valve Core Removal Tool

Features
Used by service technicians to remove and replace CoreMax valve cores in charged units or in the factory when refrigerant recovery is not necessary for rework
The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax. As a side benefit to eliminating process tubes, you may eliminate one or more brazed joints which are a potential leak path. This revolutionary method gives you the choice of how you want to test, fill and evacuate your systems. Sleeve actuated Design which allows removal and replacement of CoreMAX valve core without loss of refrigerant in charged units.
1.625" diameter x 6.125” length approximate size
Pressure up to 600 psi
Rugged stainless steel handle
Tough ball bearing quick connect coupler
Sleeve actuated tool allows core removal and replacement
Heavy-duty brass body construction
Eliminate process tubes and Schrader valves with the CoreMax High-Flow Valve
Higher flow improves vacuum quality and shortens evacuation time
Designed for CFC, HCFC and HFC refrigerants
IMPORTANT: ALWAYS USE TORQUE WRENCH, DO NOT EXCEED 8 ft-lbs (0.9 N-m) TORQUE
Product Details
Documentation
Warranty
Videos And Images
UPC
Country Of Origin

Related Products

CoreMax 1/4

PART NO.
CM-S250

Description
1/4" Seats (3 pack)

View Model
CoreMax SnapMate Service Connector

PART NO.
CM-SNAP

Description
SnapMate Service Connector

View Model
CoreMax 1/4

PART NO.
CM-SS250

Description
1/4" Saddle Seats (3 Pack)

View Model
CoreMax Manual Torque Wrench

PART NO.
CM-TRQ

Description
Manual Torque Wrench 3/8" Drive

View Model
CoreMax High-Flow Valves

PART NO.
CM-VC003

Description
High-Flow Valves with Caps (3 pack)

View Model